Professional Tool Reviews for Pros

As one of the few tuckpointing options under $200, Bosch gives you excellent performance for your tuckpointing tasks.

Most people consider the expression “set in stone” to mean something is permanent or immovable. But the masons among us might have a different perspective since we spend much of our time repairing things that have been set in stone! Brickwork is a common example. Those mortar joints deteriorate, make a wall unsightly, and allow bricks to become loose. Today, I have one of the tool options used to rake out the old joints for repointing prep: the Bosch 5-Inch Angle Grinder with Tuckpointing Guard. You may have seen this tool on the job because it’s been around for few years. But with the increased regulatory scrutiny of respirable silica dust, it’s a good time to take another look at the tool.  Let’s get to work.

A fine repointing job depends on well-raked joints. The Bosch 5-Inch Angle Grinder with Tuckpointing Guard handles the task well, and its sub-$200 price tag makes it an attractive option that benefits from Bosch quality.

I had just the job for the Bosch 5-Inch Angle Grinder with Tuckpointing Guard. A home’s old, brittle mortar had decayed so badly that bricks had come loose. I wouldn’t have been surprised if a leak had formed around the window. It was all “no bueno”. So, instead of using a raking bar or some such tool, I plugged in the Bosch, hooked up the dust collector, and started grinding away. The mortar was so old that I didn’t need a diamond blade; the included abrasive wheel worked out just fine.

The Bosch 5-Inch Angle Grinder with Tuckpointing Guard’s features offer some obvious benefits, but I’ll point them out anyway. First, you can assure a consistent raking depth. A blade guard adjustment makes changing the depth easy and quick. There’s a clear window in the guard that gives you good visibility of your work.  I didn’t feel a lot of vibration, either. The dust shroud also kept the air clear. In short, you can fire up the grinder and glide along the joint.

Changing the blade is nearly as easy as adjusting it. Just swivel the guard open for access to the blade.

The sole oddity of the Bosch 5-Inch Angle Grinder with Tuckpointing Guard is the guard’s flange. It doesn’t sit flush with the rest of the surface. This allows some small debris to escape the shroud. I must note that this isn’t dust; it’s bigger and not breathable. It’s not a very big deal, but it gives you a legitimate reason to wear eye protection. If the guard sits closer to the brick, less stuff would escape.

For a reason I can’t explain, there seems to be less of this debris when I turned the grinder over. Of course, this isn’t optimal ergonomically – and it turns the dust shroud and hose upward in an awkward way.

The base 5″ angle grinder from Bosch runs $109 and the tuckpointing shroud is another $99, so you save a little by buying the kit. If you want to move to a similar setup from Metabo, it’ll cost you $299 (or more) or you can go with something like a Dewalt starting around $219. Here’s where some of the options sit:

Obviously, there are more options, but that’s a pretty good spread of the price range and power you can expect. Bosch sits in a very good position with their 10-amp motor and sub-$200 price tag.

A fine repointing job depends on well-raked joints. The Bosch 5-Inch Angle Grinder with Tuckpointing Guard handles the task well, and its sub-$200 price tag makes it an attractive option that benefits from Bosch quality.

Specializing in stone work, outdoor kitchens, and waterfalls, Daniel has been a mason for 35 years. When he's not working he enjoys spending time with his family and watching sports. Go Steelers.

Hilti Nuron Cordless Angle Grinder Line Anchored By Intelligent 6-Inch Model With its 6-cell system and upgraded tech, Hilti Nuron […]

Next-Gen Ridgid 18V Cordless Angle Grinder Pushes Performance Forward Ridgid is coming in strong this year with a fresh batch […]

Bosch GLM165-27CG Laser Measure Reaches New Heights Bosch is definitely no stranger to the laser measure scene and they’ve recently […]

Bosch Profactor Hammer Drill Provides Power in Tough Applications If you often have to drill into tough materials like concrete […]

Where are these made (i.e. country of origin)? I’m in the market for an angle grinder but I refuse to support slavery if at all possible and it’s very difficult for me to find out where stuff is made.

As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.

See our Privacy Policy and Terms & Conditions.

Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.

There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!

Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.